Pyon's Diary

皮膚科に行つた。

簡單な診察と塗り藥の補充の爲。

Tags: None | | | | | | Permalink

KURO-BOX/PRO (No.10) 外附 USB の HDD に書込め無かつた。

先日し○めさんに作つて貰つた延長ケーブルを使つてみた。結構具合が良い。

其れは其れで良いのだが、外附 USB の HDD に書込む事が出來無い。

以前 KURO-BOX/PRO で外附 USB HDD のフォーマットが出來無かつたので今囘は母艦の方で

• パーティション作成。
• ext2 でフォーマット。
• hddrootfs.tar.gz を複寫。
• hddrootfs.tar.gz を解凍・展開。

してから KURO-BOX/PRO に繋ぎ替へ、chroot して開發環境に移り取敢へずファイルを作成出來るか touch をしてみたら行き成りエラーが出力された。

# cd
# touch a
usb 1-1: USB disconnect, address 2
SCSI error : <2 0 0 0> return code = 0x10000
end_request: I/O error, dev sda, sector 38273064
scsi2 (0:0): rejecting I/O to device being removed
Buffer I/O error on device sda1, logical block 1029
lost page write due to I/O error on sda1
scsi2 (0:0): rejecting I/O to device being removed
Buffer I/O error on device sda1, logical block 491522
lost page write due to I/O error on sda1
scsi2 (0:0): rejecting I/O to device being removed
Buffer I/O error on device sda1, logical block 1835011
lost page write due to I/O error on sda1
Buffer I/O error on device sda1, logical block 1835012
lost page write due to I/O error on sda1
scsi2 (0:0): rejecting I/O to device being removed
Buffer I/O error on device sda1, logical block 2490370
lost page write due to I/O error on sda1
Buffer I/O error on device sda1, logical block 2490371
lost page write due to I/O error on sda1
scsi2 (0:0): rejecting I/O to device being removed
Buffer I/O error on device sda1, logical block 2621442
lost page write due to I/O error on sda1
Buffer I/O error on device sda1, logical block 2621443
lost page write due to I/O error on sda1
scsi2 (0:0): rejecting I/O to device being removed
Buffer I/O error on device sda1, logical block 4292610
lost page write due to I/O error on sda1
scsi2 (0:0): rejecting I/O to device being removed
Buffer I/O error on device sda1, logical block 4358181
lost page write due to I/O error on sda1
scsi2 (0:0): rejecting I/O to device being removed
scsi2 (0:0): rejecting I/O to device being removed
scsi2 (0:0): rejecting I/O to device being removed
EXT2-fs error (device sda1): ext2_free_blocks: Freeing blocks not in datazone -2
scsi2 (0:0): rejecting I/O to dead device
EXT2-fs error (device sda1): read_inode_bitmap: Cannot read inode bitmap - bloc9
touch: a: Input/output error
usb 1-1: new high speed USB device using ehci_platform and address 3
usb 1-1: config 1 descriptor has 1 excess byte, ignoring
scsi3 : SCSI emulation for USB Mass Storage devices
  Vendor: FUJITSU   Model: MHT2020AT         Rev: 0811
  Type:   Direct-Access                      ANSI SCSI revision: 00
SCSI device sdb: 39070080 512-byte hdwr sectors (20004 MB)
sdb: assuming drive cache: write through
SCSI device sdb: 39070080 512-byte hdwr sectors (20004 MB)
sdb: assuming drive cache: write through
 sdb: sdb1
Attached scsi disk sdb at scsi3, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi3, channel 0, id 0, lun 0,  type 0

「Input/output error」が出てゐる。何でだろ。

追記: 結局。(2007-11-08)

結局、使用した外附の筐體が悪かつたらしい。

別のに換へたら上手く行つた。

Tags: Hardware | | | | | | Permalink